Want to find out which SUEZ Water Purification System product best suits your laboratory needs? Use the handy product...
For Laboratory Water Purification the following products are available:
Select edi 60
Select Fusion
Select HP
Select...
Integral 20 litre storage tank fitted as standard.
Complete installation kit
Full installation instructions
Reliability (many units in field are > 25 years old).
UK manufactured to ISO standards
Simple operation and technology
...
Remote display / dispense
Bench, underbench or wall mount
20 litre, 50 litre and 100 litre storage
ECO membrane (50%...
Low running costs
Energy saving stand-by: saves feed & drain water and energy
ECO membrane options (50% recovery).
Select edi 60, Low maintenance system for routine pure water laboratory tasks
This is a compact unit ideal for laboratory use delivering constant supply of > 1MΩ cm pure water for lab tasks using activated carbon pre-treatment, double pass reverse osmosis, carbon dioxide membrane degassing and electro-deionisation technology. Typica applications include glassware rinsing, buffers, and stains, reagent make-up and media preparation. Download datasheet
Select Fusion, Ultrapure water deionisation unit
The Select Fusion is a self-contained water purification unit that reliably delivers a steady supply of 18MΩ.cm purified water from a mains supply to life science laboratories. Diagnostic uses include histology, cell and tissue culture, DNA sequencing and IVF. Storage capacity: 50 litre option. Download datasheet
Select HP, Lab pure water deionization unit - clinical analyser feed
The Select HP is a compact unit designed to produce a consistent supply of > 10MΩ.cm water for HPLC, ion chromatography, atomic absorption, hydrogen generation, and clinical analyser feed. Storage capacity: 100 litre option. Download datasheet
Select Neptune Ultimate, Ultrapure water polisher
The Select Neptune Ultimate provides a high flow of guaranteed 18.2MΩcm ultrapure water for analytical and life science laboratory applications. Download datasheet
Select Analyst, lab deionization unit
The Select Analyst is a compact unit ideal for laboratory use, delivering a steady supply of > 1MΩ.cm pure water for laboratory tasks using carbon pre-treatment, reverse osmosis and deionisation. Typical applications include glassware rinsing, buffers and stains, reagent make-up, and media preparation. Storage capacity: 20 litre standard. Download datasheet
Select Purewater 300, Glassware washing supply
The Select Purewater 300 is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1MΩ.cm at a flow rate of up to 48 litres per hour. It can be fitted with an on-demand pure water boost pump to provide up to 1.5 bar pressurised feed with a flow rate of up to 200 litres per hour. Download datasheet
Integra L, Large centralised water system, clinical analyser feed
The ntegra L units have been designed to provide a broad spectrum of purified water for laboratory applications. Each unit is designed to feed a laboratory suite with several outlets using a ring main to provide a continuous supply. The water is stored in an integral 250 litre stainless steel tank. Two units are available: The Integra LH for hard feed water and Integra LS for soft feed water. Download datasheet
All fitted with feed water boost pump as standard.
160 - up to 16 litres / hour
320 - up to 32 litres / hour
Size based on daily usage per 10 hour working day at a feed water temp of 10°C.