Facts & Numbers
- Dimensions with lid closed: 495 x 555 x 430 mm
- Dimensions with lid open: 495 x 710 x 770 mm
- Weight: approx. 54 kg
BASIC PRINCIPLE OF THE EVAPORATOR
Vortex
The orbital-shaking (vortex) of the sample decisively increases its surface and keeps it constantly moving. Samples that evaporate at different speeds also present no
problems (variable from 0 rpm to 1000 rpm). Imbalance is a concept alien to the DancerPlus. The good thermal distribution quality accelerates the evaporation
process. Sample foaming can therefore be reduced. Any potential icing of the sample is thwarted by careful heating.
Vacuum
The Vacuubrand VarioTM vacuum system generates an optimal vacuum environment for work with the DancerPlus. The intelligent control system minimises delayed boiling through continuous adaptation of the pump frequency to the evaporation process. It automatically detects the changing vapour pressure of the solvent to be evaporated and independently optimises the pump’s working parameters.
Heating
- The heating of the sample surface is done with infrared lamps; these are found in the sample area in the lid.
- The heatable stainless steel side wall of the DancerPlus inner vacuum chamber prevents the solvent from condensing in the sample area.
- Temperature control for the DancerPlus heatable shaking plate is carried out at the base of the sample container. This allows additional a dosed heat to be applied to the evaporation process.
The DancerPlus is also suitable for light-sensitive or thermally labile samples, since all heating possibilities are precisely and carefully controlled independently of one another.
Accessories
Contact us, we are happy to assist you in choosing the accessories.
Call +31 88 221 99 00 or send an email to info@hettichbenelux.com.
POLESTARE (OPTIONAL)
Technical data
Dimensions (w x d x h) | 525 x 750 x 390 mm (standard) | |
Weight | 51 kg | |
Max. temperature | -45 °C | |
Capacity | 3,3 litres | |
Power supply | 230 V / 50 Hz | 115 V / 60 Hz |
Power consumption | 660 VA | |
Cat. No.: | POL.2301 | POL.1101 |
Call +31 88 221 99 00 or send an email to info@hettichbenelux.com.
PC 3003 SELECT (OPTIONAL)
Performance features:
- VACUU-SELECT vacuum controller with graphical user interface and predefined applications simplifies work in the laboratory
- automatic boiling point detection and adjustment of the vacuum for short process times
- ideal for evaporation of high-boiling solvents even at low temperatures
- extraordinary diaphragm life for minimum operational and servicing costs
- excellent environmental compatibility through low energy consumption and efficient solvent recovery
Cat. No.:
Call +31 88 221 99 00 or send an email to info@hettichbenelux.com.
ROTARY VANE PUMP RZ6 (OPTIONAL)
Performance features:
- high flow rates even at vacuum levels approaching ultimate vacuum
- high water vapor tolerance due to efficient gas ballast; very good ultimate vacuum even with gas ballast
- vacuum-tight at switch-off; external anti-suckback valve not needed
- large oil volume: Long intervals between oil changes
- ease of maintenance due to telescopic design
Cat. No.: RZ6
RACK R5123
Standard rack for 4 microtiter plates or deepwell plates
Cat. No.: R5123
Optional to rack R5123:
CD.Z906
FAST rack-pins only for FAST rackCD.Z908
FAST rack fixing, mounting below the rack plate, height = 30 mmCD.Z912
FAST rack fixing, mounting below the rack plate, height = 60 mm
RACK R0050
Rack for microtiter plates, DWP and SBS blocks
Rack for 35xD = 11 mm, 34xD = 12 mm, 29xD = 15 mm, 24xD = 19 mm
Thickness: 30 mm
Dimensions: 200 x 200 mm square
Mounting screw: M5x35 ISK cyl.
Cat. No.: R0050
RACK R5004-FAST
Rack for 64xD = 27,8 mm
Thickness: 39 mm
Dimensions: 246 x 246 mm
*FAST = fast removal of the rack
Cat. No.: R5004-FAST
Optional to rack R5004-FAST:
CD.Z906
FAST rack-pins only for FAST rackCD.Z909
FAST handle-set, for block-racks
Downloads
Download Contact
Additional Products
Products
